Laat een bericht achter
We bellen je snel terug!
Uw bericht moet tussen de 20-3.000 tekens bevatten!
Controleer uw e-mail!
Meer informatie zorgt voor een betere communicatie.
Succesvol ingediend!
We bellen je snel terug!
Laat een bericht achter
We bellen je snel terug!
Uw bericht moet tussen de 20-3.000 tekens bevatten!
Controleer uw e-mail!
Plaats van herkomst: | China |
---|---|
Merknaam: | Sysolution |
Certificering: | FCC,CE certification |
Modelnummer: | L30B |
Min. bestelaantal: | 1 |
Prijs: | Negotiation |
Verpakking Details: | kartondoos |
Levertijd: | 2-3 werkdagen |
Betalingscondities: | T/T, Paypal |
Levering vermogen: | 30 eenheden per week |
Haven: | Ethernethaven | RAM: | 2GB |
---|---|---|---|
ROM: | 16GB |
L30S wordt aangedreven door van Rockchip van RK3568 (schors-A55) krachtige, low-power vierling-kern bewerker met Android 11 besturingssysteem, die bij tot 2.0GHz, en steunen het ingebedde van GPU (ARMG522EE) lopen OpenGLES1.1/2.0/3.2, OpenCL2.0, en Vulkan1.1. HDMI/LVDS/EDP toon interface, Ethernet/WIFI/BT/4G-uitbreidingsinterface in één, die zeer het gehele machineontwerp vereenvoudigt. Steun het grootste deel van het huidige populaire video en beeldformaat decoderen, en kan diverse TFTLCD-vertoningen drijven. Het is stabieler en wijd gebruikt op AI servers, de apparaten van de gezichtsbetaling, veiligheid, medisch, vervoer, financiën, industriële controle, slim onderwijs, slimme kleinhandels en andere AI intelligentiegebieden.
Specificaties:
Hoofdhardwareindicatoren | |
Cpu | Vierling-kern schors-A55 met 64 bits die, bij tot 2.0Ghz wordt geklokt |
GPU | ARMG522EE-steunen OpenGLES1.1/2.0/3.2, OpenCL2.0, Vulkan1.1 |
Geheugen | 2G (Gebrek) |
Ingebouwd Geheugen | EMMC 16G (Gebrek) |
Vertoning | Steun EDP/HDMI2.0/LVDS |
Besturingssysteem | Android11 |
Spelwijze | Wijzen van de steun de veelvoudige playback zoals lijn, timing, toevoeging etc. |
Netwerksteun | 100M aanpassingsethernet, WiFi/Bluetooth 4,0 steun, de randuitbreiding van 4G |
Multimedia | Steun 4K60fpsH.265/H.264/VP91080P100fpsH.265/H.264 het video decoderen |
USB Interface |
2 USB 3,0, 2 ingebouwde USB-contactdozen (kan in 4 zijn veranderd) |
Seriële poort | 3 blijf TTL-seriële poortcontactdozen (kan in 6, RS232 of 485 zijn veranderd) in gebreke |
LVDS-Output | 1 enige/dubbele haven, kan de resolutielcd van 50/60Hz direct drijven de veelvoudige schermen |
INFORMATICAoutput | Steunen tot 1920*1080-output |
HDMI-Output | 1, steun 1080P@120Hz, 4kx2k@60Hz-output |
CTP Output | Één I2C-touch screeninterface |
Audio en Videooutput | Verlaten steun en juiste kanaaloutput, ingebouwde dubbele 8R/5W-machtsversterker |
Klok de In real time van RTC | Steun |
Timingsswitcher | Steun |
Systeemupgrade | Steunsd-geheugenkaart/Computerupdate |
Werkende temperatuur | -20°C-70°C, Geadviseerde 5°C~35°C |
Productbeeld:
Interfacedefinities:
Het volgende is de definitie van de ingebouwde contactdoosinterface
Macht-DC12V-in Interface (2.54MM Horizontale Contactdoos)
Serienummer | Definitie | Attributen | Beschrijving | |
1 | Dc12v-IN | Machtsinput | 12V machtsinput | |
2 | Dc12v-IN | Machtsinput | 12V machtsinput | |
3 | GND | Grond | Grond | |
4 | GND | Grond | Grond |
1. Verbind deze contactdoos wanneer het gebruiken van de ingebouwde machtsinput;
2. Het voedingvoltage is 12V-input, is de gebruikswaaier aanvaardbaar tussen 9V-14V, gebruikt niet de machtsadapter die dit gamma overschrijdt.
De besturingsinterface van de Backlightomschakelaar (2.0MM horizontale contactdoos)
Serienummer | Definitie | Attributen | Beschrijving | |
1 | BL-12V_IN | Machtsinput | de de machtsoutput van 12V backlight, 12V-voeding direct met de externe adapter wordt verbonden, de huidige waarde hangt van de stroom van de adapter die af | |
2 | BL-12V_IN | Machtsinput | ||
3 | ON/OFF | Controleoutput | De schakelaarsignaal van de Backlightraad, actieve hoogte, softwareconfiguratie | |
4 | ADJ |
Controle Output |
Helderheidscontrole voor LVDS-de schermen | |
5 | GND | Grond | Grond | |
6 | GND | Grond | Grond |
Spk-UIT schakelaar (2.00MM horizontale contactdoos)
Serienummer | Definitie | Attributen | Beschrijving | |
1 | SPKL+ | L de output is positief | De output van de sprekersversterker is positief | |
2 | SPKL- | L de output is negatief | De output van de sprekersversterker is negatief | |
3 | SPKR- | R de output is negatief | De output van de sprekersversterker is negatief | |
4 | SPKR+ | R de output is positief | De output van de sprekersversterker is positief |
CTP Contactdoosinterface (2.00MM Horizontale Contactdoos)
Serienummer | Definitie | Attributen | Beschrijving | |
1 | GND | Grond | Grond | |
2 | RST |
Input-output
|
Interne drop-down verbinding | |
3 | Int. | Input-output | Interne drop-down verbinding | |
4 | SCL | Input-output | Interne drop-down verbinding | |
5 | SDA | Input-output | Interne drop-down verbinding | |
6 | Vcc-3.3V | Output | Vcc-3.3V |
LVDS-Signaaloutput (Dubbele 2.0MM Horizontale Contactdoos)
Serienummer | Definitie | Attributen | Beschrijving | |
1 |
Lcdvcc-IN |
Machtsinput |
De vloeibare output van de kristalmacht, facultatieve +3.3V/+5V/+12V, facultatief via J55
|
|
2 | ||||
3 | ||||
4 |
GND |
Grond | Grond | |
5 | ||||
6 | ||||
7 | RXO0- | Output |
Pixel0 Verbied (Oneven) gegevens |
|
8 | RXO0+ | Output |
Pixel0 Positief (Oneven) gegevens |
|
9 | RXO1- | Output |
Pixel1 Verbied (Oneven) gegevens |
|
10 | RXO1+ | Output |
Pixel1 Positief (Oneven) gegevens |
|
11 | RXO2- | Output |
Pixel2 Verbied (Oneven) gegevens |
|
12 | RXO2+ | Output |
Pixel2 Positief (Oneven) gegevens |
|
13 | GND | Grond | Grond | |
14 | GND | Grond | Grond | |
15 |
RXOC- |
Output |
Verbied Bemonsteringsklok (Oneven) |
|
16 | RXOC+ | Output |
Positieve Bemonstering (Oneven) klok |
|
17 | RXO3- | Output |
Pixel3 verbied (Oneven) gegevens |
|
18 | RXO3+ | Output |
Pixel3 Positief (Oneven) gegevens |
|
19 | RXE0- | Output |
Pixel0 verbied Gegevens (zelfs) |
|
20 | RXE0+ | Output | Pixel0 Positieve Gegevens (zelfs) | |
21 | RXE1- | Output |
Pixel1 verbied Gegevens (zelfs) |
|
22 | RXE1+ | Output | Pixel1PositiveData (zelfs) | |
23 | RXE2- | Output |
Pixel2 verbied Gegevens (zelfs) |
|
24 | RXE2+ | Output | Pixel2 Positieve Gegevens (zelfs) | |
25 | GND | Grond | Grond | |
26 | GND | Grond | Grond | |
27 | RXEC- | Output |
Verbied Bemonsteringsklok (Zelfs) |
|
28 | RXEC+ | Output |
Positieve Bemonstering Klok (zelfs) |
|
29 | RXE3- | Output |
Pixel3 verbied Gegevens (zelfs) |
|
30 | RXE3+ | Output | Pixel3 Positieve Gegevens (zelfs) |
LVDS_LOGIC de Facultatieve Contactdoos van de machtsoutput (2.00MM Verticale Speld)
Serienummer | Definitie | Attributen | Beschrijving | |
1 | BL-3.3V_IN | Machtsinput | 3.3V de machtsinput, verbindingsdraad GLB wordt verbonden | |
2 | Bl-vcc-UIT | Backlightoutput | LVDS_LOGIC machtsoutput | |
3 | BL-5.0V_IN | Machtsinput | 5.0V de machtsinput, verbindingsdraad GLB wordt verbonden | |
4 | Bl-vcc-UIT | Backlightoutput | LVDS_LOGIC machtsoutput | |
5 | BL-12V_IN | Machtsinput | 12V de machtsinput, verbindingsdraad GLB wordt verbonden | |
6 | Bl-vcc-UIT | Backlightoutput | LVDS_LOGIC machtsoutput |
INFORMATICAsignaaloutput (Dubbele 2.0MM Horizontale Contactdoos)
Serienummer | Definitie | Attributen | Beschrijving | |
1 | EDP-VCC_IN | Machtsinput | De vloeibare output van de kristalmacht, facultatieve +3.3V/+5V/+12V, facultatief via J55 | |
2 | ||||
3 | GND | Grond | Grond | |
4 | ||||
5 | Informatica-TX0 | Output |
Vertoningshaven Steeg 0 verbiedt output |
|
6 | Informatica-TX0+ | Output | De positieve output van de vertoningshaven Lane0 | |
7 | Informatica-TX1 | Output | De output van de vertoningshaven Lane1negative | |
8 | Informatica-TX1+ | Output | De positieve output van de vertoningshaven Lane1 | |
9 | Informatica-TX2 | Output | De vertoningshaven Lane2 verbiedt output | |
10 | Informatica-TX2+ | Output | De positieve output van de vertoningshaven Lane2 | |
11 | Informatica-TX3 | Output | De vertoningshaven Lane3 verbiedt output | |
12 | Informatica-TX3+ | Output | De positieve output van de vertoningshaven Lane3 | |
13 | GND | Grond | Grond | |
14 | GND | Grond | Grond | |
15 | Informatica-AUX | Output | De haven AUX-Chanen negatieve singal | |
16 | Informatica-AUX+ | Output |
Haven AUX+chanenl Positieve singal |
|
17 | GND | Grond | Grond | |
18 | GND | Grond | Grond | |
19 | +3.3V | Output | Outputvoltage | |
20 | Informatica-HPD | Output | De opsporingssignaal van de het scherm heet stop |
Twee kleurenleiden en de Infrarode Interface van IRL (2.00MM Horizontale Contactdoos)
Serienummer | Definitie | Attributen | Beschrijving | |
1 | LED_RED | Output | LEIDENE lichte positieve pool, de indicatorlicht van de systeem lopend status | |
2 | GND | Grond | Grond | |
3 | LED_BLUE | Output | LEIDENE lichte positieve pool, het licht van de de statusindicator van de systeemsluiting | |
4 | Irvcc-3V3 | Machtsinput | Verre machtsoutput | |
5 | GND | Grond | Grond | |
6 | IRL-IN | Signaalinput | Het Signaalinput van IRL |
UART-TTL/RS485-Interface (2.00MM Horizontale Contactdoos)
Serienummer | Definitie | Attributen | Beschrijving | |
1 | Vcc-3.3V | Machtsoutput | Vcc-3.3V | |
2 | UART_TX/A | Output | De gegevensoutput, verbindt met RX-speld van extern apparaat | |
3 | UART_RX/B | Input | De gegevensoutput, verbindt met TX-speld van extern apparaat | |
4 | GND | Grond | Grond |
UART-TTL/RS232-Interface (2.00MM Horizontale Contactdoos)
Serienummer | Definitie | Attributen | Beschrijving | |
1 | Vcc-3.3V | Machtsoutput | Vcc-3.3V | |
2 | UART_TX/A | Output | De gegevensoutput, verbindt met RX-speld van extern apparaat | |
3 | UART_RX/B | Input | De gegevensoutput, verbindt met TX-speld van extern apparaat | |
4 | GND | Grond | Grond |
UART-TTL/RS232-Interface (2.00MM Horizontale Contactdoos)
Serienummer | Definitie | Attributen | Beschrijving | |
1 | Vcc-3.3V | Machtsoutput | Vcc-3.3V | |
2 | UART_TX/A | Output | De gegevensoutput, verbindt met RX-speld van extern apparaat | |
3 | UART_RX/B | Input | De gegevensoutput, verbindt met TX-speld van extern apparaat | |
4 | GND | Grond | Grond |
UART-TTL/RS232-Interface (2.00MM Verticale Contactdoos)
Serienummer | Definitie | Attributen | Beschrijving | |
1 | Vcc-3.3V | Machtsoutput | Vcc-3.3V | |
2 | UART_TX/A | Output | De gegevensoutput, verbindt met RX-speld van extern apparaat | |
3 | UART_RX/B | Input | De gegevensoutput, verbindt met TX-speld van extern apparaat | |
4 | GND | Grond | Grond |
UART-TTL/RS232-Interface (2.00MM Verticale Contactdoos)
Serienummer | Definitie | Attributen | Beschrijving | |
1 | Vcc-3.3V | Machtsoutput | Vcc-3.3V | |
2 | UART_TX/A | Output | De gegevensoutput, verbindt met RX-speld van extern apparaat | |
3 | UART_RX/B | Input | De gegevensoutput, verbindt met TX-speld van extern apparaat | |
4 | GND | Grond | Grond |
UART-TTL/RS485-Interface (2.00MM Verticale Contactdoos)
Serienummer | Definitie | Attributen | Beschrijving | |
1 | Vcc-3.3V | Machtsoutput | Vcc-3.3V | |
2 | UART_TX/A | Output | De gegevensoutput, verbindt met RX-speld van extern apparaat | |
3 | UART_RX/B | Input | De gegevensoutput, verbindt met TX-speld van extern apparaat | |
4 | GND | Grond | Grond |
ZEER BELANGRIJKE Externe Contactdoosinterface (2.00MM Verticale Contactdoos)
Serienummer | Definitie | Attributen | Beschrijving | |
1 | POWEN | Input | Systeem startknoop | |
2 | Het TERUGSTELLEN | Input | De interface van het het terugstellensignaal | |
3 |
SLEUTEL |
Input | ZEER BELANGRIJKE uitbreidingsinterface (tot 7 sleutels kunnen worden uitgebreid) | |
4 | GND | Grond | Grond |
GPIO-Signaaloutput (2.00MM Horizontale Contactdoos)
Serienummer | Definitie | Attributen | Beschrijving | |
1 | GND | Grond | Grond | |
2 | GPIO1 | Input-output | GPIO1 interface input-output interface | |
3 | GPIO2 | Input-output | GPIO2 interface input-output interface | |
4 | GPIO3 | Input-output | GPIO3 interface input-output interface | |
5 | GPIO4 | Input-output | GPIO4 interface input-output interface | |
6 | Vcc-3.3V | Machtsoutput | Vcc-3.3V |
USB-GASTHEER Interface (2.00MM Horizontale Contactdoos)
Serienummer | Definitie | Attributen | Beschrijving | |
1 | GND | Grond | Grond | |
2 | DP | De gegevens zijn positief | De enige gegevens zijn positief, verbinden de USB_DP-speld van het externe apparaat | |
3 | DM | De gegevens zijn negatief | De enige gegevens zijn negatief, verbinden de USB_DM-speld van het externe apparaat | |
4 | Vcc-5V | Machtsoutput | Machtskoord |
USB-GASTHEER Interface (2.00MM Horizontale Contactdoos)
Serienummer | Definitie | Attributen | Beschrijving | |
1 | GND | Grond | Grond | |
2 | DP | De gegevens zijn positief | De enige gegevens zijn positief, verbinden de USB_DP-speld van het externe apparaat | |
3 | DM | De gegevens zijn negatief | De enige gegevens zijn negatief, verbinden de USB_DM-speld van het externe apparaat | |
4 | Vcc-5V | Machtsoutput | Machtskoord |
RTC-Contactdoos (2.00MM Horizontale Speld)
Serienummer | Definitie | Attributen | Beschrijving | |
1 | GND | Grond | Grond | |
2 | RT+ | Voeding | Voedingoutput |
RTC-Contactdoos (2.00MM Horizontale Speld)
Serienummer | Definitie | Attributen | Beschrijving | |
1 | GND | Grond | Grond | |
2 | RT+ | Voeding | Voedingoutput |
Th Het volgende is de definitie van de ingebouwde contactdoosinterface
Contactdoosinterface | Definitie |
J3 | Standaard12v om hoofd 6.4mm opening, 2.0mm interne naald, positieve binnenkant en negatieve buitenkant |
J15 | De standaardtf definitie van de kaartinterface |
J8 | Standaard de contactdoosdefinitie van A HDMI |
J6 | Standaard 100M RJ45 contactdoosdefinitie (twee) |
J20 | Standaard horizontale de contactdoosdefinitie van USB3.0 |
J59 | Standaard externe oortelefoon audio broncontactdoosdefinitie |
TT
Contactdoosinterface | Definitie |
J3 | Standaard12v om hoofd 6.4mm opening, 2.0mm interne naald, positieve binnenkant en negatieve buitenkant |
J15 | De standaardtf definitie van de kaartinterface |
J8 | Standaard de contactdoosdefinitie van A HDMI |
J6 | Standaard 100M RJ45 contactdoosdefinitie (twee) |
J20 | Standaard horizontale de contactdoosdefinitie van USB3.0 |
J59 | Standaard externe oortelefoon audio broncontactdoosdefinitie |
Afmetingen
met doos
zonder doos
PCB: raad 6
Grootte: 135mm*90mm, Raadsdikte 1.6mm
De specificatie van het schroefgat: ∮3.0mm x 4